Modified printer produces living structures with more than 100 layers
Researchers at the University of Rochester and Cornell University adapted a standard plastic 3D printer for bioprinting. The system combines a syringe pump, living-cell ink and support gels, and can form structures with more than 100 layers.
The modified printer can build living structures with more than 100 layers.2
Earlier do-it-yourself bioprinters were limited to structures with fewer than 20 layers.2
With the incubation slurry, microbes in printed structures can remain alive in the slurry for four or more weeks.2
Story
How a modified plastic printer builds living materialsA bioprinter made by adapting a standard plastic 3D printer can create living structures with more than 100 layers, according to research from the University of Rochester and Cornell University.12 That capacity is notably greater than the fewer than 20 layers possible with earlier do-it-yourself bioprinters, describing a change in how tall a printed structure can be built.2 The printer can also make hollow spaces inside its structures, adding an internal form alongside the greater layer count.2 The researchers’ approach is to repurpose an ordinary plastic printer rather than rely on commercial bioprinters, which can cost upward of $100,000.12 Taken together, the layer capacity and hollow spaces show that the modified machine can shape living material in more ways than a simple solid stack.2
The change begins at the printer’s delivery mechanism: the team removed the component that feeds plastic filament and installed a pump that dispenses material from a syringe.1 The ink used in the process contains living cells mixed with a polymer solution, and it becomes a gel once deposited and hardened.2 The pump can move ink out of the syringe and draw it back, a capability that helps limit unwanted spreading at the edges of a print.2 By reducing that ooze, the mechanism helps the printer make shapes with more clearly defined boundaries, rather than leaving excess ink around them.2 The modified delivery system therefore addresses both material placement and edge definition, while the ink itself supplies the living cells and gel-forming polymer.12
A support material called a slurry provides another part of the method: the printer lays the cell-containing ink into this gel-like environment.2 The slurry holds the deposited ink in place and helps it set quickly, including when the printer is working at different heights.2 That support matters for a process that builds upward in layers, because the described material is intended to assist the ink as it solidifies at varying elevations.2 The researchers made two versions of the slurry, assigning one to prints that need to be removed easily and the other to prints intended for incubation.2 The two formulations serve different handling needs: one eases removal, while the other provides the setting used for incubation.2
The incubation version allows microbes in printed structures to stay alive within the slurry for four or more weeks, according to the reported result.2 In earlier methods, bacteria in printed materials began dying after about nine days, so the two reported time spans describe different survival periods.2 The comparison concerns microbes in printed structures under the described approaches; it does not establish that every organism or printing condition has the same outcome.2 The researchers therefore present the incubation slurry as a way to keep microbes alive for longer within the printed material, relative to the earlier method they describe.2 For researchers studying printed microbes, the reported difference is between survival measured in weeks with incubation slurry and bacteria beginning to die after about nine days in earlier methods.2
The structures are relevant to biofilms, which are communities of microorganisms arranged in three dimensions and attached to surfaces.2 The researchers say the new slurry could influence biofilm research, linking the support material to work on how such microbial communities are studied.2 The printing method also allows hollow spaces within a structure, and the researchers describe a reason those spaces may matter for embedded bacteria.2 They say hollow forms can increase surface area relative to volume, helping bacteria inside receive signals or nutrients and release products more quickly.2 These potential effects concern both the study of surface-attached microbial communities and the exchange of materials by bacteria embedded in hollow structures.2
What a printed material can do also depends on which bacteria it contains, according to the researchers’ account.2 Different bacterial choices can determine whether a material is able to clean polluted water or break down waste, including plastic.2 Together, the hollow geometry and the choice of microbes provide ways to vary the structure and biological content of a print, while the stated functions depend on the bacteria used.2 The researchers’ description connects the printer’s physical design to possible uses involving water treatment or waste breakdown, without claiming that every printed structure performs those tasks.2 The possibilities described are therefore conditional: the hollow design may help exchange, but the selected bacteria determine whether the material can clean water or break down waste.2
Anne S. Meyer, a biology professor at the University of Rochester, says the team wants do-it-yourself bioprinters to be affordable and straightforward for other scientists to assemble in their own laboratories.2 That goal gives the modified printer a different emphasis from commercial systems that may cost more than $100,000: the researchers are pursuing a buildable lab option.2 The team has made instructions for constructing the printer available through GitHub, providing a route for other researchers to access the build details.2 The stated aim and the posted instructions concern access and construction; the reported facts do not establish how many labs have built or used the device.2 The intended beneficiaries are other scientists who might build the device in their labs, while the available instructions offer access to the construction details.2
The printer’s layer capacity, its hollow interiors and the two slurry options describe distinct parts of the system rather than a single measurement of performance.2 The layer comparison is expressed as more than 100 for the modified printer and fewer than 20 for earlier do-it-yourself machines, while the survival comparison uses weeks and days.2 Those figures refer to different outcomes: the number of layers in a structure and the period microbes remain alive in the incubation setting.2 Keeping those measures separate clarifies what the results describe: a taller build than earlier DIY printers and a reported incubation period of four or more weeks.2 The comparisons indicate two distinct advances reported by the team: more layers than earlier DIY systems and a longer stated period of microbial survival.2
The wider context in the researchers’ account is the ability to print living cells in a structure whose shape, interior and microbial contents can vary.2 The slurry supports the ink as it sets, while its incubation version is associated with microbes remaining alive for four or more weeks.2 The researchers connect these features to biofilm study and to materials that may clean contaminated water or break down waste, depending on the bacteria present.2 Their stated aim is to make the printer accessible for construction in other scientists’ labs, and the building instructions are available on GitHub.2 The reported capabilities describe a platform for shaping living materials, but possible applications depend on which microbes are printed and on the structure they inhabit.2
Structure
Who is connected to whom- 1Anne S. Meyer
- uses →Fact
- part of →Fact
History
How it came to this- UndatedEarlier DIY printers had a lower layer limitEarlier do-it-yourself bioprinters were limited to structures with fewer than 20 layers.
- UndatedThe team adapted a standard plastic printerResearchers from the University of Rochester and Cornell University modified a standard plastic 3D printer to make a bioprinter.
- UndatedThe modified printer reached more than 100 layersThe upgraded machine can produce living structures with more than 100 layers.
- Nowmore than 100 Layers in living structures made by the modified printer
Impact
Spreading outward, level by level- Level 1Structure-building capacity
The modified printer can produce living structures with more than 100 layers, while earlier DIY bioprinters were limited to fewer than 20 layers.2
Fact - Level 2Printed structure design
The printer can also create hollow cavities within printed structures.2
Fact - Level 3Microbial exchange
The researchers say hollow structures can increase the surface-to-volume ratio, helping embedded bacteria receive signals or nutrients and release products more rapidly.2
Fact - Level 4Potential material uses
The bacteria included in a printed material can determine whether it can clean contaminated water or break down waste such as plastic.2
Fact
Sources
What each source supportsWritten by AI from the sources listed below: every fact was checked word for word against its source, and inference is marked apart. How we write